Euro-Clear BlueSoft-K100-VR34 Руководство - Страница 8
Просмотреть онлайн или скачать pdf Руководство для Система водоснабжения Euro-Clear BlueSoft-K100-VR34. Euro-Clear BlueSoft-K100-VR34 20 страниц. Central household water softening devices with cabinets
Печатать страницу
- 1. Table of Contents
- 2. Introduction
- 3. General Presentation of the Water Softening Device
- 4. The Operation Principle of the Water Softening Device
- 5. Description of the Chemical Operation of the Water Softening Device
- 6. The Structure of the Water Softening Device
- 7. Ways of Control of the Water Softening Devices
- 8. Installation of the Water Softening Device
- 9. Conditions of Installation
- 10. Connecting the Water Softening Device
- 11. Process of Measuring Water Hardness
- 12. Settings
- 13. Quality Certificate
Water purification and treatment equipment manufacturer and wholesale distributor
Tel: +36 96 544-240 • Fax: +36 96 544-248 • E-mail: [email protected] • Web: www. euro-clear.eu
Due to the eventual hits of pressure and pressure fluctuation, a pressure reducer or
a mechanical filter equipped with a pressure reducer must be installed.
Pressure fluctuation must not exceed ±0,5 bar! It is important that the mechanical
filter filters out contamination bigger than 100 microns.
The device does not have any extra protection against water or electricity shortage.
If you need any, it must be ensured when installing.
Connection of the water softening device:
It is the customer's job to have the water, sewage and electricity of the device
connected. The operator of the machine and the mechanic completing the
installation shall inspect if the device has been installed in compliance with the
descriptions in the guide for handling and use and if the conditions for reducing risks
coming from an eventual malfunction are provided. The commissioning of the device
can be completed either by the operator or the servicing partners of Euro-Clear
Magyarország Ltd. The commissioning of the device means only the setting of the
automatical control head in compliance with the local conditions.
When fitting, the standards valid for the local fitting, general instructions and general
hygienic standards and the technical parameters given above must be respected.
Principle scheme of the connection of the water softener:
1. Pre-filtering device with pressure reducer (100 microns)
2. Montage block + pressure gauge
3. Flexible tube pair
4. Control valve of the water softening device
5. Sewage drain
6. Electrical outlet
7. Ball valve (it can be bought in a shop )
8. Gravitation drainage
The ball valve („7") and another kit for turning off must be placed in the pipe system
in front of the water softening device. The water softening device can be connected
into a horizontal pipe section, and we advise you to apply montage block „2"
(complementary part). The „by-pass" branch makes it unnecessary to create an
evasive pipe The montage block also contains a tap for taking sample. The pre-
filtering device which has got a pressure reducer of 100 microns (No. 1) or an even
more refined one and the montage block (No. 2) must be built into the pipe in
compliance with the following: the raw water must be connected to the filter „1", and
the softened water that comes out must be connected to the montage block (No 2).
The connection between the water softening device and the montage block can be
done with the flexible tube pair No. 3. Applying a flexible pipe, the control head and
the pillar holding the resin can be protected from any mechanical tension.
When connecting, you must pay attention to the flow direction of the water. The flow
direction is marked with arrows at the connecting parts of the water filter(No. 1),
BlueSoft Household Water Softener
Euro-Clear Ltd.
Page 8.