Canon AE-1 Руководство по процедурам установки - Страница 36

Просмотреть онлайн или скачать pdf Руководство по процедурам установки для Цифровая камера Canon AE-1. Canon AE-1 48 страниц.
Также для Canon AE-1: Начало работы (2 страниц), Руководство по эксплуатации (22 страниц), Руководство (42 страниц), Руководство (12 страниц), Руководство по эксплуатации (22 страниц)

3.4

Operation Check

3.4.1 Operation Check

After installation, turn on the host machine and check

the paper feed and stapler operation.

3.4.2 Resetting the Parts Counter

After verifying normal operation, select the following

menu in the service mode to reset the parts counter.

Service mode > COPIER > COUNTER > DRBL-2

[Resetting a parts counter]

SORT

FrN-STPR

SADDLE

SDL-STPL

Pressing the clear key will reset the desired counter.

4.1

Installation Procedure

(When Installing the

Puncher Unit after Having

Installed the Finisher)

4.1 .I Unpacking the Puncher Unit

MEMO:

The machine is fitted with tape and cushioning ma-

terial to protect against vibration and shock during

transit. Be sure to remove all of it as instructed be-

fore the installation work. It is a good idea to store

away the removed tape and cushioning material for

possible future relocation and shipment for repairs.

1) Remove the attachments and the puncher unit from

the shipping box.

2) Remove the tape from the outside of the puncher

unit.

3) Open the punch upper cover.

4) Remove the two fixing screws [I] each, and detach

the front and rear punch fixing plates [ 2 ] .