Akura ALED3211E 3U Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для LED-ТЕЛЕВИЗОР Akura ALED3211E 3U. Akura ALED3211E 3U 2 страницы.

Печатать страницу

Quick Start Guide and Base fitting Instructions

GETTING STARTED

Please read the safety section (page 2) in the main instructions before proceeding further. This section

contains vital information to ensure safe positioning and use of the TV

Unpack the TV and place on a flat level surface suitable to support the weight of the TV (9.14 kg). This will require

two persons to lift the TV safely. Place the TV face down and fit the base as described overleaf.

Connect the aerial into the TV Tuner connector at the rear of the TV (Fig 1).

Fig 1

Connect the mains power lead to the mains supply and switch on. The LED indicator

on the TV will illuminate and show red (Fig 2).

Open the battery compartment cover (Fig 3) on the reverse of the remote control.

Insert 2 x AAA 1.5V alkaline batteries in accordance with the diagram in the battery

compartment. Take care to observe the correct polarity (+/-). Refit the battery

compartment cover

Press the POWER button (Fig 4) to turn the TV set on. The LED indicator will turn

green and after a few seconds, the screen will activate and the first time installation

menu (Fig. 5) will appear.

Use the cursor ▼/▲ buttons on the remote control to move up and down the display

to highlight desired options.

The default language is "English" if you want another language select that language

using the ►/◄ buttons and press OK.

Select AUTOTUNING and press OK. Fig 6 will be displayed, using the ▲/▼ buttons

select to country of use (UK is default). Select START and press OK, the TV will now

search the entire UHF range for both digital and Analog TV stations. See Fig 7. When

search is complete the TV will display the first channel (BBC1) in DVBt mode.

WATCHING TV (basic operation)

10.

To select a channel either enter the number of the channel using the number buttons

on the remote control or scroll through the channels using the channel CH+/-

buttons.

11.

To view analogue TV channels press the SOURCE button to display the source

menu. Using the cursor ▲ / ▼ buttons highlight TV on the menu and press OK to

select. To view digital TV channels select DTV on this same menu.

12.

To check the list of channels stored, press the CH.LIST button to display the channel

list and use the cursor ▲ / ▼ buttons to move up and down the display. To select a

channel, highlight the channel on the list and press OK to confirm.

13.

Adjust the volume to the desired level using the volume or cursor ◄ / ►buttons.

The sound can be silenced by pressing the MUTE button on the remote control and

a mute symbol will appear on the screen. Press the MUTE button a second time to

restore the sound.

14.

To switch off the TV for short periods, press the POWER button. The TV will go into

standby mode and the LED indicator will change to red. If not using the TV for

extended periods turn off at the mains switch to conserve electricity, all settings will

be retained.

For advanced operation of this TV please consult the Instruction Manual.

Should you have difficulty in operating this unit, please consult the Trouble -

Shooting Guide in the Instruction Manual. If you suspect a fault, please contact

the Customer Help Line, details of which can be found in the Instruction Manual.

ALED3211E 3U

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7