DOMUS LINE CAPSENS FW Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Переключатель DOMUS LINE CAPSENS FW. DOMUS LINE CAPSENS FW 6 страниц.
Также для DOMUS LINE CAPSENS FW: Руководство по установке (17 страниц)

Печатать страницу

INSTALLATION MANUAL

HOW CAPSENS FW WORKS

- AUTO ON and AUTO TEST Function. CAPSENS FW has an automatic on

feature (AUTO ON) for the devices connected to it which activates

when the device is powered; simultaneously the CAPSENS FW

automatically carries out a sensitivity test which is memorised. Any

change of installation on a different surface or in any case with

different thickness materials requires a device reset which requires

power to be removed from it for at least 10 seconds.

- ON-OFF Function. Switching the lighting devices connected to

CAPSENS FW on and off takes place through brief contact with the

hand on the surface under which the switch is installed; the activation

area is about ø 50mm of surface.

- DIMMER and LEVEL MEMORY Function. With a prolonged touch of the

hand on the activation area the brightness intensity of the lighting

devices connected to CAPSENS FW can be adjusted (DIMMER); during

adjustment of the brightness intensity a brief flashing of the device

connected to CAPSENS FW indicates that it has reach maximum

brightness. The selected brightness level will be memorised until the

next adjustment (LEVEL MEMORY).

- AUTO OFF Function. CAPSENS FW has a safety feature (AUTO OFF)

which automatically switches off the lighting devices connected to it

after 18 hours of continuous operation.

WARNING

- If the external flexible cables of this device are damaged they must be

replaced by the manufacturer or a service centre authorised by the

manufacturer.

- CAPSENS FW must be connected directly to a 12Vdc or 24Vdc

stabilised voltage safe power supply (sold separately) and must never

be connected to other electronic switches or DIMMERS of any type.

Connection of CAPSENS FW to a conventional mechanical switch for

household environments is not recommended in order to prevent

CAPSENS from carrying out the AUTO TEST function at each activation

(ON) of these switches.

- CAPSENS FW must not be installed near heat sources or in the vicinity

of electromagnetic fields that could alter or compromise operation.

WARRANTY

The warranty on the device is valid only if powered by a power supply

provided by DOMUS Line. The warranty general terms and conditions

for this device are available at www.domusline.com.