American Standard 1340M Series Руководство по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Ванны American Standard 1340M Series. American Standard 1340M Series 6 страниц. Whirlpools
Также для American Standard 1340M Series: Инструкции по установке (2 страниц)
Печатать страницу
Operation: SYSTEM I WHIRLPOOL
BATHING:
• Fill bath with water at a comfortable bathing temperature - If your whirlpool is equipped with the optional
EZ-Heater, it will automatically maintain the water temperature.
• IMPORTANT: Do not fill the whirlpool more than 2/3 full before getting in, as it may overflow.
• IMPORTANT: Do NOT add bath oils or salts – this will damage the whirlpool pump.
• IMPORTANT: Water level must be at least one inch (25mm) above the highest jet before the whirlpool is
started. Operating the system without water (dry running) for extended periods will cause
pump damage and void the warranty.
STARTING WHIRLPOOL:
• Press on/off button to start whirlpool.
STOPPING WHIRLPOOL:
• Press on/off button again to stop whirlpool.
AIR VOLUME CONTROL ADJUSTMENTS:
• Water turbulence is determined by the amount of air mixed with the water. Rotate the air volume control
counterclockwise for more turbulence--clockwise for less.
FLOW JET VOLUME ADJUSTMENTS:
• The water flow action may be adjusted from vigorous to soft by rotating the nozzle clockwise for vigorous
massage and counter-clockwise for soft massage.
SOFTER MASSAGE
(counterclockwise)
MORE AIR
LESS AIR
MORE VIGOROUS MASSAGE
(clockwise)
3
755043-100 Rev. A