American Standard Ellisse 2703.218W Технический паспорт - Страница 3
Просмотреть онлайн или скачать pdf Технический паспорт для Ванны American Standard Ellisse 2703.218W. American Standard Ellisse 2703.218W 4 страницы. Built-in whirlpool high gloss acrylic
Печатать страницу
ELLISSE BUILT-IN WHIRLPOOL
Whirlpool Featuring System II:
2703.128W End Mount Pump, Right Hand Outlet
2703.228W End Mount Pump, Left Hand Outlet
2705.128W Front Mount Pump, Right Hand Outlet
2705.228W Front Mount Pump, Left Hand Outlet
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Dual, molded-in arm rests
• Integral 3-sided tiling/water retention flange
• 2.0 HP, two speed, self-draining pump/motor
with pulse feature
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable jets
including:
- Two foot jets
- Two body massage jets
- Two back-rest jets
• Deck-mounted electronic control with 20
minute built-in timed safety shut off and
Chrome Bezel
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
StayClean™ Whirlpool Featuring System II:
2703.128WC End Mount Pump, Right Hand outlet
2703.228WC End Mount Pump, Left Hand outlet
2705.128WC Front Mount Pump, Right Hand outlet
2705.228WC Front Mount Pump, Left Hand outlet
• Same as above except with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions: 1524 x 813 x 546mm
(60" x 32" x 21-1/2")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Roughing-in dimensions and product
NOTE:
specifications shown on reverse side of page.
Rev. 3/03
ELLISSE BUILT-IN™ WHIRLPOOL
To Be Specified - Required:
Color:
Bath Filler: (specify finish)
Bath Drain: 1583.470 (specify finish)
Grab Bar Kit: 9827-200-two per kit (specify finish)
To Be Specified - Optional:
Safe-T-Heater*: 9075.120
Ellisse Apron: 9160.2705(specify color)
Jet Trim Ring Kit: 9860.200-two per kit (specify
finish)
System II Control Bezel: 9861.200-two per kit
(specify finish)
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
© 2003 American Standard Inc.
HIGH GLOSS ACRYLIC
BV-18