D2G gravitee GK-2009 Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Монитор D2G gravitee GK-2009. D2G gravitee GK-2009 9 страниц. 10' x 20' display
Печатать страницу
© 2023
Order #XXXXX
SEG Graphic Installation
Corner A
Corner B
Corner D
Corner C
Step 1
It is important to first insert
Insert corner A. Turn edge of
graphic into each alternate
graphic so silicon welt is
corner, then to the sides of
perpendicular to face of
the frame. If this is not done,
graphic. Insert narrow side
graphic will not fit into the
of welt with fabric to outside
frame correctly.
into the channel. Repeat for
other side of this corner.
Step 2
Step 3
Repeat Step 1 for opposite
Once all corners are inserted,
corner C, then insert corner
press one silicon edge into
B, followed by corner D, to
channel from corners and
complete the installation of
work toward the center.
the corners.
Make sure welt is fully inserted
into channel. Continue until
all sides are done. Smooth
out edges of graphic.
Graphic Removal
To remove the graphic from
the frame, locate the fabric
pull tab. Gently pull up on
the tab to remove the fabric.
Backwall Attachments
Steps:
1) Apply SEG graphics to backwall panels as shown.
2) Connect lights to top of panels where indicated. See
S E G Gra phic
FRONT VIEW
Light Attachment
detail.
*
*
* *
S E
G G
r a p
h i c
*
Light Attachment
Lock Clip into Groove of
Horizontal Extrusion, then
slide Light onto Clip.
Lock into
groove of
horizontal
Slide light into light
receiving hardware
G
S E
p h i
c
G r a
Step 2 of 5