Air Comm Systems ACS 775SL-100 Руководство по установке и эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Музыкальный микшер Air Comm Systems ACS 775SL-100. Air Comm Systems ACS 775SL-100 8 страниц. Single audio mixer panel
Печатать страницу
ACS 775SL-100 Operations and Installation Manual
Interface Schematic
Interface Schematic
Connector Pin-out
The ACS 775SL-100 wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade).
Power and ground wires should be 18 or 20 AWG, and all other wires may be 22 AWG. Shielded wires
should be used where noted. Adequate protection against wear and chafing should be taken by using a
braided cable sleeving or jacket. Before completing installation, verify that all cable connector pins are
seated properly and that the connector is securely mounted to the unit mating connector. Important -
please note the power of the unit before installing; it will be 14VDC and clearly marked as such on the
unit's data tag.
Pre-fabricated cable harnesses are available from Air Comm to expedite installations. Consult our sales
department for details.
5 | P a g e