Domyos ELLIPTICAL ESSENTIAL Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Эллиптический тренажер Domyos ELLIPTICAL ESSENTIAL. Domyos ELLIPTICAL ESSENTIAL 20 страниц.

Печатать страницу

Domyos ELLIPTICAL ESSENTIAL Руководство по эксплуатации

Functions:

- Speed: This function indicates estimated speed, either in km/h or mph, depending on the position of the switch at the rear of the console.

- DISTANCE: This function indicates estimated distance covered since beginning of exercise session.This can be in km (kilometres)

or m (miles) depending on the position of the switch at the rear of the console.

- TIME: This function indicates how much time has elapsed since the beginning of the exercise session; this is given in minutes and seconds

(MM:SS).

- CALORIES: This function displays an estimate of calories expended since the beginning of the session.

Your console will automatically light up as soon as you start pedaling.

When the console lights up, it will automatically be in AUTOSCAN mode.

In this mode, the 4 types of information listed below, are displayed in succession every 5 seconds.

Press the MODE button to select the information you want to display and remove the AUTOSCAN mode.

Adjustment switches are at the back of the console:

- Switch 1: Selection of type of apparatus that you are using with the console : VM (magnetic bike) ---- VE (elliptical bike)

- Switch 2: Selection of unit of measurement for DISTANCE. MI (Miles) ---- KM (Kilometres)

Resetting the product to zero:

- The product goes into standby mode after about 10 minutes of inactivity.

- The indicators return to zero when in sleep mode (data is not saved).

- Removing and replacing a battery in the console.

Battery installation

1- Remove the console from stand and place 2 AAA (1.5V) batteries in the specially designated

compartment at back of screen. *

2- Ensure that the batteries are inserted correctly and are in full contact with the springs.

3- If the display is unreadable or incomplete, remove the batteries, wait fifteen seconds

and put them back.

* NB: the battery compartment on your console is not designed to have a cover.

Recycling:

The "crossed-out bin" symbol indicates that this product and the batteries it contains cannot be thrown away with household

waste.They must be separated and recycled specially. Take the batteries and unusable electronic product to an authorised

collection area for recycling. Recycling your electronic waste will protect the environment and your health.

TROUBLESHOOTING

If you notice any abnormal distances or speeds:

- Check the switch on the back of the console is set to VM for exercise bike / VE for cross trainer.

-Remove and replace a battery to reset the console.

NB: On an exercise bike, each pedal turn corresponds to a distance of 4 metres, on a cross trainer it corresponds to a distance of 1m60

(these values correspond to average biking and walking values).

If you find that your counter does not indicate the correct units of measurement for distance:

- Check the switch on the back of the console is in the MI position for display in miles, KM for display in kilometres.

- Remove and replace a battery to reset the console.

If the counter does not turn on:

- Check that the batteries are correctly positioned (+/-).

- If the problem persists, start again with new batteries.

- In both cases, check that the cables are correctly connected behind the console and where the bracket joins the main frame of the bicycle.

- If the problem persists, refer to the last page of the instructions.

If a noise emanates from inside the case and you cannot adjust the intensity level, do not attempt to repair it. Refer to the last page of the

manual.