American Standard Savona Elite 2901E SERIES Инструкции по установке

Просмотреть онлайн или скачать pdf Инструкции по установке для Ванны American Standard Savona Elite 2901E SERIES. American Standard Savona Elite 2901E SERIES 4 страницы. Whirlpool, high gloss acrylic shown less all fittings

Печатать страницу

SAVONA ELITE™

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

905mm

(35-5/8)

552mm

1105mm

(21-3/4)

(43-1/2)

305mm

(12) 140mm

(5-1/2)

C/L OF 1-1/2 O.D.

DRAIN OUTLET

RECOMMENDED

FITTING LOCATION

64 X 279mm (2-1/2 X 11)

38mm

(1-1/2)

51mm

(2)

INTEGRAL

FEET

44 mm

(1-3/4)

89 mm

(3-1/2)

1-1/2 O.D. TAILPIECE

GENERAL SPECIFICATIONS FOR 2901E WHIRLPOOL

INSTALLED SIZE

71-1/4 x 43-1/2 x 22 In.(1810 x 1105 x 559mm)

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

752867-100 Rev. D

2901E SERIES

WHIRLPOOL

INSTALLATION INSTRUCTIONS

1810mm

(71-1/4)

IN-LINE HEATER

REMOVABLE

BLANK

C/L

178mm

(7)

ON/OFF

SWITCH

229mm X 305mm

(9 X 12) FLOOR

CUTOUT

PROVIDE ACCESS

TO PUMP FOR SERVICE

ON ALL INSTALLATIONS

C/L OF OVERFLOW

LEVELING STRINGER

89mm

NOT FOR SUPPORT

(3-1/2)

ROUGH

FLOOR

1-1/2 N.P.T.M.

THREADS

152 Lbs. (68 Kg.)

936 Lbs. (421 Kg.)

94 Gal. (356 L)

86 Gal.(326 L)

44 x 28 In. (1118 x 711mm)

67-1/2 x 33 In. (1715 x 838mm)

16-1/4 In. (413mm)

43 Lbs./Sq.Ft. (211 Kgs./Sq.m)

2.1 HP, 14.4 AMPS, 120V.

19mm

(3/4)

TYP.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

PUMP

OUTLINE OF

whirlpool version is completely assembled with pump,

1772mm X

motor, and system piping. All you need to finish the

1067mm

(69-3/4 X 42)

installation are your selected fittings and electrical

CUTOUT

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

List of Optional Components (not included):

• Flex-Jet Pulse Jet Kit*

• Flex-Jet Soft Jet Kit*

• E-Z-Install Heater*

• Tile Bead Kit*

559mm

(22)

List of Required Components (not included):

508mm

(20)

• Drain*

* see your Home Depot Retailer

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

27.8

• Personal Safety

61.5

Equipment

• Caulking Gun

• Bath Filler*

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

• Drop Cloth

• 20 amp GFI

• Cement, Plaster,

All product names listed herein are trademarks of

American Standard Inc. unless otherwise noted.

Stringers

Outlet

Grout