Da-Lite 27971T Книга инструкций - Страница 5

Просмотреть онлайн или скачать pdf Книга инструкций для Проекционный экран Da-Lite 27971T. Da-Lite 27971T 12 страниц.

Wall Mounting for Panoramics with 24" Marker Tray

NOTE: The screen is shipped with four wall brackets and lengths

shipped vary by screen size. Two brackets will be used on the

center panel and one bracket on each of the side panels.

Measure gap on each side panel to determine which two

brackets will be used with these panels. These brackets will be of

an equal length. The remaining two brackets (also of an equal

length) will be used to hold the weight of the center panel. Use

appropriate mounting hardware for the wall type and to

accommodate for the screen's total hanging weight.

Secure the two center panel wall brackets to wall studs at the

desired height. The outside edge of each wall bracket must be

no greater than 5" away from the left or right panel seams. You

will need at least 1" clearance above the drilled holes to hang the

screen.

No More

than 5"

Tray Installed in Step 8

2. Secure the two side panel wall brackets to wall studs at the height

selected in Step 1. Each side panel wall bracket should be

centered between the seam brace and left or right outside edge

of the frame when mounted to the wall (Figure 3).

NOTE: Do not proceed if all four brackets are not level with each

other or a gap may appear between each of the panels when

mounted.

3. To install the (2) center panel L-brackets, you must measure the

overall height of the screen frame and subtract 1 1/8". Using that

dimension, measure down from the top edge of each of the

center wall brackets and mark the wall for two screw holes. The

outside edge of each center panel L-bracket must be no greater

than 5" away from the left or right panel seams (Figure 3).

4. Secure the two center panel L-brackets to the wall at the marked

locations. The longest side of the two center panel L-brackets

should be pointing upwards when secured in order to hide the

L-brackets behind the screen frame once the screen is installed

(Figure 3).

Wall Brackets

Screws (Not Supplied)

Figure 3

No More

than 5"

L-Bracket

No More

than 5"