American Standard ACTICLEAN 7381737-400.0070A Сборка

Просмотреть онлайн или скачать pdf Сборка для Туалеты American Standard ACTICLEAN 7381737-400.0070A. American Standard ACTICLEAN 7381737-400.0070A 2 страницы. Flapper with teeter bar

Печатать страницу

American Standard ACTICLEAN 7381737-400.0070A Сборка

FLAPPER ASSEMBLY WITH TEETER BAR

P/N: 7381737-400.0070A

•

Flapper

assembly including adjustable teeter

bar with clevis & hair pins

TO REMOVE FLAPPER ASSEMBLY:

• Turn off water supply; flush toilet (remove all

water from the tank)

• Remove electronic tank top unit by lifting lid

and turning quarter turn screws to the Unlock

position and lifting upwards (see FIGURE 1)

• Remove hair pin and clevis pin from the RED

trip lever arm (see FIGURE 2); this frees the

yoke from the red arm

• Remove hair pin and clevis pin from the

BLACK trip lever arm (see FIGURE 2); this

frees the bead chain from the black arm

• Place fingers underneath hinge and pull up

to release all 4 hinges (see FIGURE 3)

• Remove original flapper assembly from tank

TO RE-INSTALL:

• Align the flappers to the flush valve body and

push all four hinges into place (NOTE: the

bead chain should face the front of the tank)

• Insert the RED trip lever arm into the yoke

(see FIGURE 2)

• Push the clevis pin through the arm (see

FIGURE 2); make sure the head of the pin is

facing the front of the tank

• Insert the hair pin (see FIGURE 2)

•

Attach

the BLACK trip lever arm to the bead

chain coupler (see FIGURE 2)

• Push the clevis pin through the arm (see

FIGURE 2); make sure the head of the pin is

facing the front of the tank

• Insert the hair pin (see FIGURE 2)

----------------------------------------------------------------

Product names listed herein are trademarks of AS America Inc.

----------------------------------------------------------------

™

ACTICLEAN

FIGURE 1

FIGURE 2

FIGURE 3

7302225-100 (06/16)