American Standard 1748 Руководство по установке и эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Горячая ванна American Standard 1748. American Standard 1748 16 страниц. Aths with integral apron
Также для American Standard 1748: Технические характеристики (2 страниц), Руководство по эксплуатации и техническому обслуживанию (10 страниц)
Framing and Installation
LOCATE STUDS AS REQUIRED. ENSURE ROUGH
DIMENSIONS ARE PROPER, PLUMB AND SQUARE.
THE FOLLOWING PROCEDURE MUST BE USED FOR ALL
INSTALLATIONS: STRINGER HEIGHT SHOULD BE AS
INDICATED.
THE SUMP OF THE BATH IS SUPPORTED BY WOOD
RUNNERS AND NO ADDITIONAL SUMP SUPPORT IS
REQUIRED.
Alcove Installation
LEVELING
STRINGERS
E
*D
A
* "C" AND "D" ARE FOR BATH DRAIN LOCATIONS ONLY.
SUGGESTED WHIRLPOOL/BATH INSTALLATION METHOD FOR
1701, 1713, 1718, 1748, 2221, 2631, 2905 AND
WOOD STUDS
STUD
WATER PROOFING DRYWALL
OR CEMENT BOARD
TILE
ROOFING NAIL
SEALANT
TUB
2 5 x 7 6 m m ( 1 x 3 ) W O O D
S T R I N G E R F U L L L E N G T H
SECURE THE BATH TO THE STUDS AS SHOWN FOR WOOD OR STEEL STUD CONSTRUCTION
757222-A
ONCE THE BATH IS IN PLACE, THE RUNNERS SHOULD BE
SHIMMED ACCORDINGLY, SO THAT THE RIM OF THE BATH
CONTACTS THE STRINGER OR PIER BUT SUPPORTS NO
WEIGHT.
ANY FINISH MATERIAL, SUCH AS TILE OR WALL BOARD,
MUST BE SELF-SUPPORTING IF IT CONTACTS THE RIM OF
THE BATH.
WATERPROOF DRYWALL
OR CEMENT BOARD
25 x 76mm (1 x 3) WOOD
3586
MODELS
STEEL STUDS
STEEL
STUD
WATER PROOFING DRYWALL
OR CEMENT BOARD
TILE
SEALANT
TUB
2 5 x 7 6 m m ( 1 x 3 ) W O O D
S T R I N G E R F U L L L E N G T H
(3)
SUGGESTED BATH INSTALLATION METHOD FOR
1700, 1717, 1750, 1752, 2530 AND 2647 MODELS
WOOD STUDS
STUD
TILE
ROOFING NAIL
SEALANT
TUB
STRINGER FULL
SECURE THE BATH TO THE STUDS AS SHOWN FOR WOOD OR
STEEL STUD CONSTRUCTION
WASHER
4" (102mm)
DRYWALL
SCREW
NOTE:
BUILDING MATERIALS AND
WIRING SHOULD BE
ROUTED AWAY FROM THE
PUMP BODY.
STEEL STUDS
STEEL
STUD
WATERPROOF DRYWALL
OR CEMENT BOARD
TILE
SEALANT
TUB
25 x 76mm (1 x 3) WOOD
STRINGER FULL LENGTH
WASHER
102mm (4")
DRYWALL
SCREW