EKHO EK-WL8-AU Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Аксессуары EKHO EK-WL8-AU. EKHO EK-WL8-AU 7 страниц. Wireless heat sensor
Также для EKHO EK-WL8-AU: Руководство (6 страниц)
Печатать страницу
STFV.425238.032-AU-UM rev. 16
SMOKE SENSITIVITY
Smoke sensitivity level can be changed in translator menu.
WL8-TRH
vXX/RFYY
Configuration
Maintenance
3 sensitivity options are available, these can be selected only by using the translator
menu or the Ekho configurator software (setting via the control panel will have no
affect and sensor will remain in the selected mode).
TESTING
An alarm test can be performed with a magnet by placing it onto the outside of the
sensor (opposite side to the base alignment marks) the sensor should take around
1 second to activate.
A suitable smoke or heat test tool can also be used, please follow the instructions
to apply smoke/heat to the sensor in the correct way.
ANALOG DATA
The device provides the translator module with analog data about the current smoke
level, air temperature, dust in the chamber and voltage levels of its batteries. This
information can be viewed in the "Ekho Configuration" software.
By analyzing the voltage or dust levels you can manage maintenance procedures
and predict when you will have to replace the batteries or clean the smoke sensor.
Please refer to the software manual for full instructions on how to use the Ekho
Configurator for system maintenance.
Password
Radio
Signal line
Start Addr
EK-WL8-OH/AU
WIRELESS MULTI-SENSOR SENSOR
10.08.2020
001 wl8-trh
002 wl8-o
003 wl8-oh
Page 4 from 7
Delete
Edit
Init
Info
Photo
sensitivity
Normal
High
Low