EKHO RX1500 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель EKHO RX1500. EKHO RX1500 6 страниц.
Печатать страницу
Connect to mains power
Before plugging the unit in always make sure that the power supply matches the product specification
voltage. First connect the IEC end of the cordset to the IEC connector on the amplifier then plug the other
end of the cordset to the AC mains.
Please read instructions below for reliable and problem free use:
Be sure all connections made are made in the correct way.
Check if the connected speakers are compatible with the amplifier.
Ensure there is adequate ventilation.
Prevent exposure to moisture.
Never plug speakers in/or out while in use, this can result in serious damage.
Specifications
Specification
4 Ohm Stereo
Power
8 Ohm Stereo
Power
8 Ohm Bridge
Power
Frequency range
Dampings factor
Signal to noise
ratio (SNR)
Slew Rate
Input Sensitivity
Input Impedance
Power supply
Dimensions
(bxhxd)
Weight
Note: Specifications and design are subject to change without notice for purpose of improvement.
This product meets the requirements of the EMC and LVD Directives.
RX800
RX1200
2x 400W
2x 600W
2x 300W
2x 450W
800W
1200W
10Hz ~ 20kHz (±1.2dB)
9.0kg
9.5kg
RX1500
2x 750W
2x 1000W
2x 500W
2x 750W
1500W
>250
>90dB
30V/uSec
0.77V
20kOhm
220-240Vac / 50Hz
482 x 314 x 88mm
10.0kg
6 - 6
RX2000
RX3000
2x 1500W
2x 1000W
2000W
3000W
10.5kg
11.5kg