Ekinex EK-BK1-TP Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Шлюз Ekinex EK-BK1-TP. Ekinex EK-BK1-TP 4 страницы. Dmx knx tp
Печатать страницуNote. Configuration and commissioning of the ekinex®
gateway require specialized skills about KNX networks
and knowledge of the specific ETS automation project.
In order to acquire such skills, it is essential to attend
trainings and workshops organized at KNX-certified
training centers. For further information: www.knx.it.
Dimensions [mm]
72
3
4
5
ETHERNET
Com
RT-
RT+
RS485
Failure
Area
KNX
Line
DMX
Dev.
Device state
POWER S.
EK-BK1-TP
+V
0V
8...24 Vac
DMX / KNX TP Converter
1
2
12...35 Vdc
Certifications
The product complies with the Low Voltage
Directive (2006/95 / EC) and Electromagnetic
Compatibility Directive (2004/108 / EC)
The product is compliant with 2002/95 /
EC Directive about usage restriction of
certain
hazardous
substances
electronic equipment (commonly referred to as the
Restriction of Hazardous Substances or RoHS).
Maintenance
The device is maintenance free. To clean it, use a dry
cloth. Using solvents or other aggressive substances is
strictly forbidden.
Disposal
The product described in this data
sheet, at the end of its useful life, is
classified as waste from electronic
equipment, according to the European
Directive 2002/96 / EC (WEEE),
implemented in Italy by Legislative
Decree no. 151 of 25 July 2005, and can not be
disposed as solid municipal waste.
Importante! Improper disposal of the product may cause
serious damage to the environment and human health.
For proper disposal refer to collection and treatment
informations provided by local authorities.
70
5
25
20
20
in
electrical
and
Document
This data sheet refers to the release A1.0 of the
ekinex® device code EK-BK1-TP and is available for
download on the site www.ekinex.com PDF (Portable
Data Format).
Filename
STEKBK1TP_EN.pdf
Warning
•
Installation, electrical connection, configuration and
commissioning of the device can only be carried out
by qualified personnel.
•
Opening the housing of the device causes the
immediate end of the warranty period.
•
ekinex® KNX defective devices must be returned to
the manufacturer at the following address: EKINEX
S.p.A. Via Novara 37, I-28010 Vaprio d'Agogna (NO)
Italy.
Other information
•
This application manual is aimed at installers,
system integrators and planners
•
For further information on the product, please
contact the ekinex® technical support at the e-mail
address: [email protected] or visit the website
www.ekinex.com
•
KNX® and ETS® are registered trademarks of KNX
Association cvba, Brussels
© EKINEX S.p.A The company reserves the right to make changes to
this documentation without notice.
Pag. 4
Release
Update
11 / 2015
A1.0