EKO Extreme W240 Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Сотовый телефон EKO Extreme W240. EKO Extreme W240 10 страниц.

EKO

Extreme W240

Batteries

The battery is included in the package. It is not fully charged out of factory but it may

still be able to power on your phone. Please completely use up the power of the

battery and then charge it for at least 12 hours with your phone turned off. You

battery will reach its optimal state after three cycles of charge and discharge.

Installing and uninstalling the battery

To install the battery, remove the back cover from the phone by pressing firmly on

the cover and slide it down. Align the golden contacts of the battery to the contacts

in the phone, and then gently snap down the battery into place. Re‐assemble the

back cover.

To uninstall the battery, flip the battery out from the bottom of the battery.

Charging the battery

Plug the charger into the socket on the side of your phone. Connect the charger to an

AC wall socket. The blinking of the battery level icon indicates the battery is being

charged. When the blinking stops, it indicates the charging is finished

During charging, the phone and charger will feel warm to the touch. This is normal.

Warning:

The operating ambient temperature of the charger is 0℃‐50℃. Do not use it when

the temperature exceeds this limit.

Use only chargers approved by the phone manufacturer to ensure safety. Failing to

comply with this will violate the terms and conditions of the warranty.

Using the battery

The waiting time and calling time capacities specified by the phone manufacturer are

obtained under the ideal operating environment. The actual values will vary with the

network condition, operating environment and operation method.

Please comply with the local regulations of disposing the battery (such as recycling).

Do not dispose it as household waste.

Page 3