Dongguan Taide Industrial Enusic BT025 Краткое руководство по эксплуатации
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Динамики Dongguan Taide Industrial Enusic BT025. Dongguan Taide Industrial Enusic BT025 2 страницы.
Печатать страницу
尺 寸 ：50* 8 0 m m
PRECAUTIONS
1. Please store and use this product at the ambient temperature;
2. Do not expose this product to the rain or damp surroundings;
3. Prevent this product from falling that could result in serious
MODEL:
BT025
damage;
4. Do not dismantle, repair or modify this product on your own;
5. In order to avoid any risk, do not dispose this product
inappropriately or toss it into the fire as there is a built-in
lithium battery.
CONSIDERATE HINTS
1. Do not turn up the volume to a fair high level constantly
as this could shorten the service life of this product or impair
your hearing;
2. When encountering any fault during operation, please
cut off the power supply and disconnect the USB cable to
prevent further damage to the speaker or other components;
3. The Bluetooth transmission range or connectivity could be
affected by low battery power. In that case, please recharge
immediately.
OVERVIEW
Wireless Speaker
SPEAKER PHONE OPERATION
Press to answer an incoming call; press to hang up
Keep pessing to reject an incoming call.
Double click to redial the last phone number.
AUX PLAYBACK OPERATION
1. Turn on the speaker.
2.Insert an 3.5mm audio cable into the aux jack, connecting
to any audio device such as mobile phones or computers with
the other end of the cable.
3.Play/pause as desired by pressing .
4.Press or shortly to increase or decrease the volume.
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is
rechargeable and provides approx 3.5 hours continuous
operation when fully charged.
Use the micro-USB cable to charge the speaker. The red
indicator light will glister. The red indicator light will go off
when the speaker is fully charged.
SPECIFICATION
Bluetooth Specifications:Bluetooth V4.0
Transmission Distance:
10M (depending upon operation
≤
Unable to pair up with
environment and devices to which it connects)
other devices
Built-in Battery: Lithium battery 1050mAh
Output Power: 5W*2
Frequency Response: 90Hz-20KHz
Sensitivity: 80db±2db
Signal to Noise Ratio (SNR) :
80dB
≥
product dimension:125*58*60mm(LxWxH)
- : Volume down or select last track
+:Volume up or or select next track
:Power on or Power off, Hands-free call control button/
Play/Pause
BLUETOOTH OPERATION
1.Press for 3 seconds to turn on the speaker. The indicator
light will flash to detect Bluetooth enabled devices near you.
Power on/off
AUX
Micro USB Port
The indicator light will go off if no Bluetooth device is detected
Play/Pause/
within 5 minutes.
Hands-free Call
2.Pair the speaker with the desired Bluetooth device.
3.Press Play / Pause. + Short press select to increase the
volume, press and hold down a switch. - Short press to
AUX DC 5V
decrease volume, press and hold on a jump.
4.When you want to play music from another Bluetooth
device, disconnect the speaker and restart the Bluetooth
speaker and re-pair.
ACCESSORIES
1*Enusic 003 Wireless
Speaker
1*Micro USB charging cable
The sound is rather low
1*3.5mm Audio cable
or distorted
1*User Manual
COMPATIBILITY
Device equipped with BLUETOOTH 4.0 or higher version
(for details please refer to the relevant agreements, general
specification), such as the IPAD, IPHONE (the second
generation and IPHONE with updated IPHONE 3.1 software),
IPOD TOUCH, MAC with Bluetooth, and most of smart phone
The music stops from
or computer support Bluetooth.
time to time
Bluetooth 4.0 including agreements as:A2DP, AVRCP, HFP.
TROUBLE SHOOTING
Phenomena
Solutions
Faults
The Bluetooth indicator
remains off
1.Check if the speaker is still in the
process of search or switch it off
and then on.
2.There are too many enabled
Bluetooth devices within 10 metres
circle that cause difficulty in
connection. If so, please turn these
Bluetooth devices off.
Volume down/Last track
1.Check the Bluetooth device's
volume and then adjust it to a
proper level.
2.Recharge the battery
Check whether the speaker's
effective transmission range is
exceeded or there is an obstacle
between the speaker and enabled
Bluetooth device.
1.It suggests the battery power
drops quite low and retry once being
recharged.
2. Turn it on again.