Donner EMO-AMP Controller Руководство пользователя
Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальная педаль Donner EMO-AMP Controller. Donner EMO-AMP Controller 2 страницы.
Печатать страницу
Owner's Manual
Introduction
Are you still worrying about your
neighbors' complaints when you're
rocking loud at home? Try this EMO-
AMP Controller! This tiny passive
attenuator is designed for connecting to
your amp's FX Loop jacks: get
connected, set a level and done.
Precautions
READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a convenient
place for future reference.
Power Supply
Always use a DC 9V center negative AC
adapter. Use of an adapter other than
that specified could damage the unit or
cause malfunction and pose a safety
hazard.
Always connect the AC adapter to an
AC outlet that supplies the rated voltage
required by the adapter.
Disconnect the AC adapter from the AC
outlet when during lightning storms or
not using the unit for an extended
period.
Connections
Always turn off the power before
connecting or disconnecting. Make sure
to disconnect all cables and AC adapter
before moving the unit. This will help
prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the
following conditions that could cause
malfunction:
●Extremely hot or cold places
●Under direct sunlight
●Magnetic fields
●Near heaters and other heat sources
●Sandy or dusty places
●Places that are extremely humid or
exposed to splashing water
●Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to
interference or that emits powerful
electromagnetic waves (e.g. radios and
TVs) should not be placed near this unit,
as interference could occur.
Electromagnetic interference could
cause malfunction and could corrupt or
destroy data.
Always operate this unit at a suitable
distance from these devices.
Handling
Do not apply excessive force to the
switches and other controls, exposing
the unit to strong impacts, which could
cause it to break.
Do not put foreign objects or liquids into
the unit.
Never open the case or attempt to
modify the product in any way since this
can result in damage to the unit.
Clean only with a soft, dry cloth.
Overview
●Rock Out At Low Volume
The EMO-AMP Controller is a passive
attenuator designed for using with your
amp's FX Loop jacks (better settle it in a
serial FX loop). When you need to rock
out at low volume, this will be a great
help. But remember: do not set it
between your amp and cabinet.