Amerihome EPCOOK6 Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электрическая скороварка Amerihome EPCOOK6. Amerihome EPCOOK6 12 страниц. 6 qt. electric pressure cooker

CAUTION
1.) Never use the pressure cooker along with flammable products or in a humid location.
2.) The amount of water added to the inner tank should be determined in line with step 2 of operation.
3.) Never damage the sealant washer or replace it with other rubber washer or tension washer.
4.) Never twist the inner steel ring with hand or other tools. If the steel ring slips off place, stop using the
cooker until it is replaced with manufacture certified ring.
5.) The anti-block case should be kept clean by cleaning regularly.
6.) Never attempt to uncover the cooker when the floating valve is flopping.
7.) Never apply any weight on the pressure-discharging valve or replace it with other materials.
8.) Never block the clamping position of the lid to ensure safety.
9.) The surface of the cooker and the heating plate should be clean, never use the inner tank to cook on
other thermal sources or have it replaced by other cookers.
10.) The inner tank is coated with anti-sticking materials. To avoid scratching, use wooden or plastic
spoons when cooking.
11.) Be sure to keep your hand or face away from the air exit hole of the pressure limiting air release
valve when you discharge the air never touch the lid of the pot to avoid any scald burn when the cooker
is turned on.
12.) The maximum length for keeping warm is 8 hours. However, a duration of less than 6 hours is
recommended.
13.) Large amounts of steam discharging from the periphery during operations is not normal. Unplug the
power cable immediately and allow the steam to vent. Get it repaired or replaced by your manufacturer
prior to next use.
14.) When moving the cooker: hold the ears of cooker instead of the handle.
15.) Dismantling or replacement by using accessories other than supplied is not recommended.
16.) In case of alarm sounding during operation use the below chart for troubleshooting the error
indicator.
F
10