Astra H-31,5 ES Руководство по установке и эксплуатации - Страница 18

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Котел Astra H-31,5 ES. Astra H-31,5 ES 20 страниц. Heating boilers

Печатать страницу

Designation:

Control device is designed for the control of the solid fuel boiler. Fan is controlled according to the law of

proportional – integral- differential regulation (PID) and the pump, air valve or electric heating device are

regulated positionaly.

Temperature sensor NTC is installed in the water tight capsule which is immerged into the water of boiler.

Voltage of the fan L2 is connected from the control pannel of the boiler to the control device when the boiler

works in the heating regime

commutator of the fan connects L3 to L2. The relay of control of pump connects L4 to L1. It connects P with

L1.

The power of the fan is 20÷100 VA. The maximal power of the controlled pump is 250 VA. Maximal controlled

power of the relays of programmed output is 250 VA.

Exploitation

After the loading of fuel the fan is put into operation with the swith on the control panel. There appears green

signal light "Heating" 3 (Fig. 2.) and the process of the fan control begins. The fan is working only when the

green signal light No. 3 is on.

The desired water temperature of the boiler is set with the keys 2 (2 pav.). By short pressing of "+" or "-", digital

indicator 1 starts to indicate the temperature of the water in the boiler. For the change of the temperature it is

necessary to press and to keep the related key (for the increasing "+", for decreasing "-" ). After the few

seconds after the last press of the key the set temperature is saved and the indicator starts to show the

measured temperature of the water (when indicator shows the set temperature , there is a point lighting near

the digits ; when indicator shows the real measured temperature there is no point lighting near the digits).

The speed of the fan is proportional to the deviation of the temperature, to its duration and to the rate of the

increase/decrease of the water temperature in the boiler.

Each time at the start there is launched the electric magnet, which opens air valve and there appears light 8.

Control of the pump

The pump of the heating system can be switched on for the continuing operation or it can be switched on and

off depending on the water temperature. The operation of the pump and the temperatures for the switch on /

off are defined by the servicing staff, referring to the characteristics of the heating system. When the pump is on

there is a signal light 5 on the front pannel of the control device (fig 2.).

Burning control

The state of work „heating off" is indicated in the following cases:

Technical description of the control device KR-4/2

Connection:

Control device is connected according to the scheme designed on the

fig, No. 1:

L1, N – supply of electricty to the control device;

L2 – supply of electricity to the fan;

L3 – voltage to the fan;

L4 – voltage to the pump;

P – voltage to the programmed output.

Fig. 1. Scheme of the connection of control device

(the fuel is loaded and the limit thermical relay is not in action).

1 – digital temperature indicator;

2 – temperature setting keys;

3-6,8 – signal lights:

3 – "heating",

4 – "heating off",

5 – "pump",

6 – "fan",

8 – "programmed output".

7 – programmed output control key

Fig. 2. Front pannel of the regulating device

Impulse

18 |

P a g e