DoorHan FAST-750 Руководство по установке и эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Открыватель ворот DoorHan FAST-750. DoorHan FAST-750 16 страниц.
Также для DoorHan FAST-750: Руководство по установке и эксплуатации (18 страниц)

Печатать страницу

DoorHan FAST-750 Руководство по установке и эксплуатации

POSSIBLE MALFUNCTIONS AND TROOBLE SHOOTING

to avoid electrical shock all operations on setting and connection shall be carried out by the qualified and licensed personnel.

Malfunction

operator does not run

gate can not be opened from the remote control

remote control coverage area is too small

guide chain moves and gate does not move

Warning sound signal is on.

gate does not reach terminal positions or does

not work

gate work with troubles, on indicator the "Н"

lights

gate stopped suddenly, on indicator the "F"

lights

squeak during system operation.

Chain makes noise and rubs guide

PossIble MalfUncTIons anD Trooble sHooTIng

Possible reason

1. no power 2.Fuse is damaged

1. remote control code is not entered 2. Battery

in remote control is discharged

Battery in remote control is discharged

slide is released and not connected to chain

support.

1. gate is opened 2. Warning sound signal after

2000 cycles to perform maintenance

error by programming.

electronics failure due to high humidity

1. gate touched the obstruction or mechanics

was jammed. 2. unstable power supply.

guide chain is not enough lubricated after long-

run use

Chain became too long.

I n s t a l l a t I o n a n d o p e r a t I n g m a n u a l s e C t I o n a l - 7 5 0 / 1 2 0 0

Solution

1. turn on the power 2.replace the fuse

1. reenter the remote control 2. replace the power battery

replace the battery

match the slide with the support and connect the slide.

1. Close the gate 2. turn of the power and turn on it again.

perform programming

Clean the control board (this operation shall be done by

technician)

1. Check the gate mechanics, remove obstruction 2.

Check supply voltage.

lubricate the chain

lubricate the cog wheel of the chain and tension the

chain.