AMERITRON RCS-12 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переключатель AMERITRON RCS-12. AMERITRON RCS-12 16 страниц. Automatic antenna switch
Печатать страницу
Ameritron RCS-12 Instruction Manual
Introduction
Congratulations on your choice of the Ameritron RCS-12 Automatic Antenna Switch. The RCS-12 is
specially designed to give you automatic antenna switching with hands free operation. This unit also has
the flexibility to work with many different station configurations. Please read this manual thoroughly
before operating your RCS-12.
Features
Easy to Operate: The RCS-12 is straightforward and basic. Operate with ease in minutes!
Easy to Program: Automatic operation is easily accomplished, and is programmed much the same way
as the presets on the AM/FM receiver in your vehicle.
Compatibility: This antenna switch has been designed to use the band data output, on your radio, to
automatically switch antennas.
transceivers. Some other radios are also compatible.
Versatile: The RCS-12 will work with the 5 and 8 position tower-mounted relay boxes from Ameritron.
However, the RCS-12 will work with any relays using up to 30VDC. Output formats can be 1 of 8, 3
line BCD, or 4 line BCD.
Transmitter Protection: The RCS-12 will not allow you to change antennas while you are transmitting.
A user programmable delay is used to give the relays time to fully open, so that your transmitter will be
completely protected against "Hot Switching."
RCS-12 Specifications:
Input Voltage:
Output (Relay) Voltage:
Relay Output Format:
Switchable Antennas:
Dimensions:
This unit is compatible with most Icom, Yaesu, and Kenwood
+13.8V – 30V DC
+12V – 30V DC
3 Line BCD, 4 Line BCD, or 1 of 8
Up to 8
7.5" x 8.25" x 2.75"
1
Automatic Antenna Switch