Astralpool HALO HUB Руководство по установке - Страница 8
Просмотреть онлайн или скачать pdf Руководство по установке для Осветительное оборудование Astralpool HALO HUB. Astralpool HALO HUB 12 страниц. Automation expansion module
Печатать страницу
8
•
"Hub Viron Heatpump" uses the Hub RJ45
connector and an "Ethernet" cable directly to the
heat pump.
•
"Hub GPO" uses GPO1 to turn the power on or off
to the heater.
•
"Hub Relay Contact" uses the hub "Heater"
connector. (See Appendix 1 for wiring details.)
4.2
Configuration and Setup
After pairing all of your Halo devices, they must be
configured.
1.
Press the "settings" icon on the "HOME" page of
the chlorinator.
2.
Press the "INSTALL" Icon in the top ribbon of the
"Settings" page of the chlorinator.
3.
Press "Configure" in the "Equipment
Configuration" area on the Install page.
HALO
®
HUB
The list that is generated is used to describe how you
wish to use the equipment.
For example:
•
If you are installing Lights, what brand of lights are
they, do you want to use timers to control them?
•
The General Purpose Outlets (GPO's) can be
named using this screen.
•
If you are configuring a heater, and you wish to
use a separate heater pump for that heater, name
the GPO as "Heater Pump" as above and then
configure the heater to use the heater pump.
•
If you are using valves or relay, press the
"Configure" button and then press "Valves/Relays/
Inputs".
By default valve 1 and valve 2 are dedicated to pool
and spa valves. (and can't use timers).
If they are required for a different purpose, they can
be re-named by pressing on their existing name and
choosing another name. (Valves 3 & 4 can be named in
a similar fashion.)
Input 1 and 2 can be assigned to activate a favourite
on the chlorinator or "All Off or "All Auto". (See the Halo
Chlor manual and configure and name the favourites
prior to assigning them to an input.) See Appendix 2
for more information.
™
installation manual