Canon PIXMA MX870 Series Руководство по настройке сети - Страница 3

Просмотреть онлайн или скачать pdf Руководство по настройке сети для Принтер "все в одном Canon PIXMA MX870 Series. Canon PIXMA MX870 Series 34 страницы. Setting up in default mode (tel priority mode) without an answering machine
Также для Canon PIXMA MX870 Series: Руководство по установке (17 страниц), Руководство по установке (11 страниц), Руководство по настройке сети (16 страниц), Брошюра (2 страниц), Руководство по установке сети (24 страниц), Руководство по установке сети (17 страниц), Руководство по настройке (15 страниц), Настройка (15 страниц)

Problems during Network Setup

Easy setup

Advanced setup

Check

Check 1

Make sure that you follow Check 1, 2, 5 and 6 of

"Connection Checklist" on page 15, then press the left

FUNCTION button (A) on the machine to search for the

access point again.

Check 2

Turn off the access point, then turn it back

on, then press the left FUNCTION button

(A) on the machine to search for the

access point again.

Is SSID broadcast (connection via "ANY" SSID, etc.) disabled or is the stealth mode

enabled on the access point?

•

Enable SSID broadcast (connection via "ANY" SSID, etc.) or disable the stealth mode,

then press the left FUNCTION button (A) on the machine to search for the access point

again.

•

To establish a connection without changing the access point settings, refer to "Entering

the Access Point's Wireless LAN Settings Directly on the Machine" on page 11.

Is the MAC address filtering enabled on the access point?

•

Set the access point to accept the MAC address of the

machine.

•

Check 3

For details on how to check the settings of the access point, refer to the manual supplied with the

access point or contact its manufacturer.

For details on how to change the settings of the access point, refer to the manual supplied with

the access point or contact its manufacturer.

Check 4

For details on how to check the settings of the access point, refer to the manual supplied with the

access point or contact its manufacturer.

For details on how to change the settings of the access point,

refer to the manual supplied with the access point or contact its

manufacturer.

To check the MAC address of the machine, press the Setup

button, then using the { } [ ] and OK buttons, select

Device settings > LAN settings > Confirm LAN settings >

WLAN setting list, then check MAC address.