AmerTac TM15DOLB Руководство по эксплуатации и гарантия

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и гарантия для Таймер AmerTac TM15DOLB. AmerTac TM15DOLB 3 страницы. 2-outlet outdoor digital timer

Печатать страницу

TM15DOLB

Instruction Manual & Warranty

2-Outlet Outdoor Digital Timer

Getting Started

NOTE: Before first use, remove the plastic protective tab in the battery

compartment.

When turned on, the display will read as shown in Figure 1.

Setting Current Time

Press and hold CLOCK button during entire process.

Press HOUR button to advance the hours.

Press MIN button to advance the minutes.

Press DAY button to advance the day.

Setting Programs

Press PROG button once. Display will look as shown in Figure 2.

The number "1" in the lower left hand corner indicates you are

programming EVENT 1. Press DAY button repeatedly until the display

shows the day you want timer to turn on.

Options Include

All days of the week: MO, TU, WE, TH, FR, SA, SU

Individual days of the week: MO, etc

Weekdays only: MO, TU, WE, TH, FR

Weekends only: SA, SU

Press HOUR and MIN buttons to set time for device to turn off

for EVENT 1. Repeat ON/OFF program procedures outlined above for

each event (up to seven events) as needed.

When finished, press CLOCK button to return to current time display.

Reviewing Event Programming

In current time display, press PROG button repeatedly to check settings.

When finished, press CLOCK to return to current time display.

Setting Mode

The Mode acts as an ON/OFF override or sets the events to

Automatic or Random.

To override current program (ON/OFF), press MODE button once.

To override current program (Automatic), press MODE button once.

To run events in a Random mode (ON/OFF is + / – 30 minutes of programmed

times), press MODE button until RDM is displayed in the upper left

hand corner.

The Random mode is a security feature that will give your home a

more lived-in look.

Installing Timer

Plug timer into AC outlet. Plug lamp(s) or other device(s) to be controlled

into receptacle(s) at bottom of timer.

OFF

Figure 1

MO TU WE TH FR SA SU

Figure 2

Backup Battery Replacement

Timer runs on one AA battery when not connected to AC power.

To remove battery, unscrew battery door using a Phillips head screwdriver.

Remove battery and replace with new AA battery.

Tightly screw battery door in place.

Battery is designed to save settings in the event of a power outage.

Battery will not provide power to devices plugged into timer.

Specifications:

120V~, 60Hz

15A, 1800W General Purpose

8.3A, 1000W Tungsten

0.25HP Motor

Limited One Year Warranty

AmerTac™ warrants this product to be free from defects in material

and workmanship for a period of one year from the date of purchase.

AmerTac's obligations are limited to repairing or replacing any defective

unit and are effective only if such units are returned within one year

of the purchase date to AmerTac, 250 Boulder Drive, Breinigsville, PA

18031. Warranty void if damage is due to misuse or improper installation.

In no circumstance will AmerTac be liable for consequential or incidental

damages relating in any way to this product.

Questions?, ¿Preguntas? 201.661.9945

Saddle River Executive Centre,

One Route 17 South, Saddle River, NJ 07458

www.amertac.com

Made in China