Flycam HD-5000 Руководство по сборке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по сборке для Аксессуары для фотоаппаратов Flycam HD-5000. Flycam HD-5000 10 страниц. Video stabilizer
Также для Flycam HD-5000: Руководство по эксплуатации (11 страниц), Руководство по эксплуатации (16 страниц)



A telescopic Central Post (Part-2) is made

by loosening the control located at the

base, raising or lowering, a threaded stud is

located in the center of Base Platform

(Part-3) for attaching Central Post. Securely

tighten the adjustment knob on telescoping

clamp by rotating it clockwise.

NOTE: The adjustment knob should only be tightened by hand. Do not over-tighten it as it could cause

thread stripping.



Loosen allen bolts at the bottom of Camera

Plate (Part-1c), align its holes with the top of

Central Post (Part-2) & re-tighten them se-

curing the plate to post.

NOTE: If you wish to bypass Quick Release Plate, the camera can be directly attached to Head Plate by

following this assembly sequence:



Remove Head plate (Part-1) from 3-piece

Head Assembly in order to attach it to your

camera. You will note a number of

mounting holes that can be used to adapt

various cameras. Keep the camera in center

of Head Plate (Part-1) and secure it proper-

ly.



Insert the V-Shape adapter (Part-5) onto the

head plate (Part-1) then insert the washer &

Screw as shown in the Images.



Keep the camera in center of Head Plate

(Part-1) and secure it properly. Do not over

tighten this adjustment as it can break the

threaded insert.

NOTE: In the image of 15 number, its tighten

accessory (Part-9) you can use according to

your need.