Cognisys SCOUT Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для фотоаппаратов Cognisys SCOUT. Cognisys SCOUT 20 страниц.
Также для Cognisys SCOUT: Руководство пользователя (18 страниц)

Печатать страницу

2.7 Aux LED Selection

This switch selects how the external power LED behaves on the Repeater once it is turned on.

There are three available selections. If this switch is set to "1", the LED is disabled during wake-

up and communication (dark mode). If set to "2", the LED will briefly blink when it wakes up

after seeing a wireless signal from a sensor. If set to "3", the LED will briefly blink when wireless

messages are being forwarded back and forth between the Camera Box and sensors.

2.8 Power Button

The power button is on the side of the Repeater:

Press this button to turn on the Scout Repeater. To turn it off simply press and hold this button

for approximately two seconds until the red LED goes out.

2.9 "Pairing" to your Camera Box

The Scout Repeater needs to know which Camera Box you would like to use it with. This pairing

process only needs to be done once. The process is easy:

1. Turn on your camera box (it's okay if it goes back to sleep).

2. Make sure only one Camera Box is within wireless range.

3. Turn on the Repeater.

4. The Repeater will scan all available wireless channels looking for the Camera Box. Once it

finds one the process is complete!