Acer AcerSystem Руководство пользователя - Страница 23

Notice for New Zealand

The grant of a Telepermit for any item of terminal equipment indicates only that

Telecom has accepted that the item complies with minimum conditions for

connection to its network. It indicates no endorsement of the product by

Telecom, nor does it provide any sort of warranty. Above all, it provides no

assurance that any item will work correctly in all respects with another item of

Telepermitted equipment of a different make or model, nor does it imply that

any product is compatible with all of Telecom's network services.

This equipment is not capable, under all operating conditions, of correct

operation at the higher speeds for which it is designed. Telecom will accept no

responsibility should difficulties arise in such circumstances.

Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this

device. The associated equipment shall be set to operate within the following

limits for compliance with Telecom's Specifications:

There shall be no more than 10 call attempts to the same number within

any 30 minute period for any single manual call initiation, and

The equipment shall go on-hook for a period of not less than 30 seconds

between the end of one attempt and the beginning of the next call

attempt.

Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this

device. In order to operate within the limits for compliance with Telecom's

specifications, the associated equipment shall be set to ensure that automatic

calls to different numbers are spaced such that there is not less than 5

seconds between the end of one call attempt and the beginning of another.

This equipment shall not be set up to make automatic calls to Telecom's 111

Emergency Service.

This device is equipped with pulse dialing while the Telecom standard is DTMF

tone dialing. There is no guarantee that Telecom lines will always continue to

support pulse dialing.

Use of pulse dialing, when this equipment is connected to the same line as

other equipment, may give rise to bell tinkle or noise and may also cause a

false answer condition. Should such problems occur, the user should NOT

contact the telecom Fault Service.

This equipment may not provide for the effective hand-over of a call to another

device connected to the same line.

Under power failure conditions this appliance may not operate. Please ensure

that a separate telephone, not dependent on local power, is available for

emergency use.