Canon 8800F - CanoScan - Flatbed Scanner Краткое руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сканер Canon 8800F - CanoScan - Flatbed Scanner. Canon 8800F - CanoScan - Flatbed Scanner 32 страницы. User guide
Также для Canon 8800F - CanoScan - Flatbed Scanner: Краткое руководство по эксплуатации (16 страниц), Брошюра (10 страниц), Руководство пользователя (2 страниц), Руководство по эксплуатации (28 страниц)

Scanning Film

This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below

when scanning film.

Remove the protective sheet from the

document cover.

Press and hold the lever at the top of the protective

sheet while you

detach it.

• Store the protective sheet in a safe place so that it will not get bent or broken.

• Always put the protective sheet back when you are not scanning film to protect the light

source in the document cover.

Insert the film into the Film Guide.

• Use a blower brush to remove any dust from the film, which will affect the image quality, and

take care to hold the film by its edges to avoid transferring dirt or fingerprints to it.

• Do not block the calibration slot on the Film Guide when scanning film. Colors will not be

scanned correctly if the calibration slot is obstructed.

• Close the Film Guide securely. Press lightly until it clicks into place.

35mm Film Strip

Open the film holder on the film guide, place the film face down and close the film holder.

Align the Film Guide's tab with the FILM symbol on the document glass of the scanner.

Ensure that there is no gap between the edge of the film and the film guide on the side near

the calibration slot.

pull the sheet outward and

Film Holder

Calibration Slot