Cogvis fearless Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары Cogvis fearless. Cogvis fearless 12 страниц.

Note the following

—› Please make sure that you have a good WiFi coverage in the room before

installation.

—› Please make sure that your WiFi connection can be established directly by

entering the WiFi name and password and no login via an additional login

form is required.

—› Keep your login data ready for the fearless platform and make sure,

a smartphone or laptop is available.

—› In addition, never put the sensor into operation when it is not mounted.

2. Package contents and preparation

Package contents for the fearless system for on-site installation:

—› USB power supply and 5 m connection cable

—› fearless sensor

—› 4 dowels and 4 screws

The fearless sensor consists of 2 parts: the metal base part with the already

mounted board (evaluation unit) and the white plastic sensor housing.

Metal base part

The sensor housing is connected to the base unit through 4 clamps. Both parts

can be released from each other by slight pressure from the outside (along the

lower edge of the sensor unit in the area of the clamps). Please note the following

illustration:

Step 1: Press on both sides of the outer edge of the

unit in the area of the clamps and gently push the

base out on one side.

Plastic sensor housing

Step 2: If the first side is released, apply the same

principle to the second side and remove the base

completely from the housing.

fearless

Installation guide

Page 3 of 12