AIR GAP AG110-001 Процедуры установки

Просмотреть онлайн или скачать pdf Процедуры установки для Промышленное оборудование AIR GAP AG110-001. AIR GAP AG110-001 2 страницы. Reverse osmosis air gap

Печатать страницу

4. The AG110-001 must be installed with the "C/L" line

above the sink's rim, sump, floor drain, floor grate, or

standpipe where the discharge tubing is terminated. The

AG110-001must be installed vertically. Secure

AG110-001 with provided mounting screws (See Fig 1-4).

Mounting Screws

Critical Level (C/L) marking

"C/L"

0.857"-0.900"

Fig 1-4

5. Connect 3/8" OD poly tubing from

your RO unit to AG110-001 inlet

port and 3/8" OD poly tubing from the

AG110-001 outlet port to the drain

pipe. Use provided clamps and

screws to secure tubing. (See FIG

1-5)

5/8" I.D. Poly

tubing

The 5/8 inch ID tubing fits

AG110-001 and can be used if

desired. The AG110-001 design

enables the larger tube to be

used for inlet or outlet, or to be

as part of a double-sealed

system, or to provide added

mechanical protection to the

inside tubing. (See FIG 1-6)

500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: [email protected]

Clamp

3/8" O.D.

Poly tubing

3/8" O.D.

Fig 1-5

Poly tubing

Also fits

5/8" I.D. Poly tubing

Fig 1-6

Model:

AG110-001

REVERSE OSMOSIS

AIR GAP

Old Part Number:

GAP-A-RO, KIT S-A

Doc.#400-0653-003

Placentia, California