Canon DR-2020U - imageFORMULA - Document Scanner Справочное руководство - Страница 20

Просмотреть онлайн или скачать pdf Справочное руководство для Сканер Canon DR-2020U - imageFORMULA - Document Scanner. Canon DR-2020U - imageFORMULA - Document Scanner 40 страниц. Class-leading flatbed scanner with single-pass duplex adf scanning
Также для Canon DR-2020U - imageFORMULA - Document Scanner: Брошюра и технические характеристики (26 страниц), Брошюра и технические характеристики (2 страниц), Брошюра и технические характеристики (33 страниц), Карманное руководство (32 страниц), Карманное руководство (30 страниц), Брошюра и технические характеристики (2 страниц)

Placing Cards into the Business Card

Feeder

Open the business card feeder.

Hold down the lever ( ) on the side of the business card

feeder, and place the cards into the feeder with the

scanning side facing up. Fully insert the cards until they

reach the stoppers ( ) at the back of the feeder.

Close the business card feeder when scanning is

finished.

IMPORTANT

• When the business card feeder is open, only the Business Card and

Auto-detection options are available for the paper type

configuration under the driver settings. In addition, documents

loaded into the feeder cannot be scanned.

• Open and close the business card feeder gently. Excessive force

may result in damage to the business card feeder.

• Precautions for using the business card feeder are the same as

those for the feeder. (See p. 13.)

• Close the business card feeder when it is not in use.

• Business cards are ejected in reverse order after scanning from the

business card feeder.

• Scan plastic cards on the flatbed.

When the Scanner Is in Sleep Mode

When the scanner is not operated for a specific amount of time, it

automatically enters the sleep mode. The scanner automatically exits

the sleep mode if you initiate scanning from a computer. However, to

initiate scanning from the scanner's operation panel, you must exit the

sleep mode manually.

To exit the sleep mode manually, press the POWER button on the

operation panel. The scanner exits the sleep mode.