ASTRO DEVICES Nexus DSC Pro Руководство по быстрой настройке - Страница 9
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Аксессуары ASTRO DEVICES Nexus DSC Pro. ASTRO DEVICES Nexus DSC Pro 13 страниц.
Печатать страницу
default:
The INFO tab shows additional information
about the object:
1
4
5
where:
1
– Object's information
2
– Currently selected object's azimuth
3
– Currently selected object's RA
4
– Telescope's AZ/RA
5
– Telescope's Altitude/Declination
6
– Currently selected object's altitude
7
– Currently selected object's declination
Pointing accuracy
Pointing accuracy depends on a number of
factors:
• Quality of the telescope mount
• Choice of alignment stars
• Accuracy in pointing on alignment objects
To achieve the best pointing accuracy with an
Altitude-Azimuth mount it is recommended that:
• The alignment stars chosen should always
be at 30 to 80 degrees in altitude and
separated by at least 70 degrees in
azimuth.
• Alignment stars should ideally have at
least a few degrees separation in altitude
• Polaris can be used as one of the
alignment stars
To achieve the best pointing accuracy on an
Equatorial mount it is recommended that:
• Polaris should never be used as one of the
alignment stars
• Alignment stars with a declination greater
than 80 degrees should be avoided
• The alignment stars chosen should always
be at 30 to 80 degrees in altitude and
separated by at least 70 degrees in RA.
9
2
6
7
Locating an object
Once the two star alignment is performed
Nexus DSC Pro can locate celestial object in
the sky.
The following steps describe a basic location of
celestial objects.
Go to the top menu and select Find:
3
Select From Catalogues:
Select a catalogue by using the
keys and then press the
The display will show the last selected object:
Suppose we would like to find NGC55. Just
press the
5
to continue typing the object number:
Now press the
:
OK
Nexus DSC Pro will now show where to move
the telescope to aim at NGC55:
Nexus DSC Pro Quick Setup Guide
:
OK
key and the display will prompt
5
key again and then press
and