AIR GAP AG140-001 Процедуры установки - Страница 2
Просмотреть онлайн или скачать pdf Процедуры установки для Диспенсер для воды AIR GAP AG140-001. AIR GAP AG140-001 2 страницы. 2-inch standpipe universal 14gpm
Печатать страницу1- Water Softener Air Gap
1- Mounting Base for 2" Pipe
The AG140 -001 is a water softener air gap, designed to share the drainpipe with a washing
machine discharge tubing. The AG140-001 feature a flow straightener to quiet and smooth out
turbulent flow and splash shields to provide completely dry operation.
• Air gap fits into a recessed washing machine box with 2" drain pipe
• Allow space for washer drain hook or soft rubber washer hose
• Tested at 15 GPM (56.8 Liter/minute)
• Recommended usage 7 GPM (26.7 Liters/minute)
• Inlet port fits 1/2" schedule 40PVC slip fitting with O ring
• UPC® listed and tested for compliance with IPC and NSF standards
Please read the instructions once through before starting.
AG140-001 INSTALLATION INSTRUCTION
1. Make sure that the flow rate output of the water softener meets AG140-001 flow capacity limits.
2. Install the water softener air gap into the mounting base, as shown (see FIG 1-1), for dimensions see FIG 1-2.
Top View
Flow Softener
1/2" PVC slip w/flow softener
O-ring
Inlet Port
Air gap opening (1.5" x0.4")
(on both sides of unit)
Water Softener Air Gap
Outlet port
Side View
Fig 1-3
AG140-001
Installation Procedures
LIST OF PARTS ENCLOSED
Always comply with local plumbing codes during installation
Fig 1-1
(Recessed into wall)
Washing Machine Wall Box
(outlet box)
AG140-001
Mounting base
installed into 2" Drain
pipe
Washer drain hook
or soft rubber washer hose
Water softener air gap
2" PVC
Mounting base
3. Insert water softener air gap in the mounting base, into 2"
drain standpipe.(see FIG 1-3).
-OVER-
1.82"
"C/L"
Critical level
1.10"-1.18"
2"
Fig 1-2
2.5"
4.7"
6-3/4"