Flying Industry Development 0020535 Краткое руководство - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство для Приемник Flying Industry Development 0020535. Flying Industry Development 0020535 4 страницы. Rf wireless receiver

Печатать страницу
Press button 1: Turn on relay 1 of Receiver 1 (connect B and C, disconnect A and B)
Turn off relay 2 of Receiver 1 (disconnect B and C, connect A and B)
Press button 2: Turn on relay 2 of Receiver 1 (connect B and C, disconnect A and B)
Turn off relay 1 of Receiver 1 (disconnect B and C, connect A and B)
...
Press button 11: Turn on relay 1 of Receiver 6 (connect B and C, disconnect A and B)
Turn off relay 2 of Receiver 6 (disconnect B and C, connect A and B)
Press button 12: Turn on relay 2 of Receiver 6 (connect B and C, disconnect A and B)
Turn off relay 1 of Receiver 6 (disconnect B and C, connect A and B)
Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
1) Control mode Momentary (Channel 1 of Receiver 1, 2, 3, 4, 5, 6): Press -> On; Press again -> Off.
Press and hold button 1: Turn on relay 1 of Receiver 1 (connect B and C, disconnect A and B)
Release button 1: Turn off relay 1 of Receiver 1 (disconnect B and C, connect A and B)
...
Press and hold button 11: Turn on relay 1 of Receiver 6 (connect B and C, disconnect A and B)
Release button 11: Turn off relay 1 of Receiver 6 (disconnect B and C, connect A and B)
2) Control mode Toggle (Channel 2 of Receiver 1, 2, 3, 4, 5, 6): Press and hold -> On; Release -> Off.
Press button 2: Turn on relay 2 of Receiver 1 (connect B and C, disconnect A and B)
Press button 2 again: Turn off relay 2 of Receiver 1 (disconnect B and C, connect A and B)
...
Press button 12: Turn on relay 2 of Receiver 6 (connect B and C, disconnect A and B)
Press button 12 again: Turn off relay 2 of Receiver 6 (disconnect B and C, connect A and B)
How to pair the transmitter to the receiver:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press button 1, 3, 5, 7, 9 or 11 on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) Receiver 1 learns the transmitter, press button 1 of transmitter.
Receiver 2 learns the transmitter, press button 3.
Receiver 3 learns the transmitter, press button 5.
Receiver 4 learns the transmitter, press button 7.
Receiver 5 learns the transmitter, press button 9.
Receiver 6 learns the transmitter, press button 11.
4) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
5) The receiver can learn several remote controls with different codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don't want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored
codes have been deleted successfully.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com