Canon Microfilm Scanner 400 Руководство по эксплуатации - Страница 18

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сканер Canon Microfilm Scanner 400. Canon Microfilm Scanner 400 34 страницы. Compact film scanner

Печатать страницу

OPERATING PROCEDURES

This section describes procedures for normal operation of the unit:

Turning the unit on and off.

Adjusting the image on the screen.

Printing the image on the screen.

Turning the unit on/off

Follow the procedure below to turn the unit on and off.

1. If you have installed an FS Controller III auto carrier, turn the

controller on first.

2. On the front of the main unit, locate the power switch on the lower

left corner then press the I side of the switch to turn the power on.

3. Turn on the power switch of the printer.

After you turn the unit on, the Print display starts to blink and will

continue to blink while the unit warms up. While the Print display

is blinking, you cannot start operation. When the Print display

stops blinking and stays on, the unit is ready for normal opera-

tion.

4. To turn the unit off, press the O side of the power switch.

Setting the film

Load the auto carrier with the film you want to view. For details

about the auto carrier installation, see the instructions you received

with the auto carrier.