Colasit CDVA 400 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Вентилятор Colasit CDVA 400. Colasit CDVA 400 16 страниц. Roof fan in plastic

1.9

EU and UK conformity of the COLASIT fan

The fan was designed, built and tested to Directive 2006/42 EC and UK regulation "Supply of Machinery

(Safety) Regulations 2008: Great Britain (S.I. 2008 No. 1597), and related amendments".

In addition to this EU Directive and EN standards which have the equivalent status of a Swiss standard,

Swiss safety and accident-prevention regulations have also been taken into account.

An UK Declaration of Conformity in terms of the UKCA regulations (S.I. 2008 No. 1597) on machines will be

issued along with the fan.

1.10

We stipulate that putting into operation is prohibited as long as the fan, including all parts

belonging to it or equipment connected to it, has not been installed and checked out and

until the operating manual has been read completely before commissioning.

We stipulate that the fan may only be put into operation when the safety inspector has given

his approval. He is obliged to record this approval in a protocol.

The disregard of these stipulations constitutes negligence.

1.11

The permissible operating conditions are indicated on the manufacturer's plate.

The fan is not suitable for the transport of solids in the air flow. This operating mode will

lead to the destruction of the fan.

The ducts on the intake and delivery sides must always be open. A closed duct will lead to a rise in

temperature which could cause the destruction of the fan.

The minimum air speed through the fan is 3 meters per second.

The standard motors are designed for normal operating conditions (ambient temperature +40°C,

altitude below 1000 m above sea level, air pressure up to 1050 hPa).

In case of any divergence from these conditions, please contact COLASIT.

Compliance with these operating conditions is the responsibility of the operator.

The fan is completely assembled and can be delivered in a closed film wrapping.

Please make sure the delivery corresponds to the shipping documents.

Please examine the packaging for external damage and report any damage immediately to

the transport company, the supervisor and the manufacturer.

Please handle the fan with care. During transportation, only apply strain on the steel parts. Plastic is

sensitive to impact and knocks, especially in the temperature range under +5°C.

Page 7

TD-000 812-E

Edition 02/2023, Subject to alteration

COLASIT AG

Plastics construction

CH-3700 Spiez

Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61