Dadant Fill Master M006262 Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Промышленное оборудование Dadant Fill Master M006262. Dadant Fill Master M006262 5 страниц.
Печатать страницуLet's Practice!
I. Set your Fill Master on a table top or bench at a convenient working height. Plug your Fill Master into a standard house-
hold 120-Volt receptacle. Before attempting to fill containers with actual product, we suggest you practice for a short
time using water or simply running the unit to get acquainted with setting different fill quantities.
1. With the power switch set on off, plug your foot pedal cable into the socket on the front of the Fill Master.
2. Turn the Fill Master power switch "on". Note: The filler may be stopped at any time by turning the power switch "off"'.
3. Press the "Manual Fill" button several times to get the "feel" of using it. (This is used to fill one or two containers or
"top off" some containers.)
4. To practice setting fills, proceed as follows:
a) Place the "Mode" switch in the pedal position.
b) Turn the "Time Interval" off (full counter clockwise).
c) Look at the digital display screen. There are two lines of possible numbers. The Top line indicates the fill number
the Fill Master has currently counted. The bottom line indicates the fill number that you determine the Fill Master
is set to fill. Press the Red Button to set the top line to zero. The bottom line is set to zero by using the "left arrow"
key which changes what number position you want to change, ones, tens, hundreds, position, etc. The number
position you select will flash. The "up arrow key" changes the actual number each time you push the key. The
number must be flashing to change it. To change which number flashes, push the left arrow key. A number flashes
for four seconds before being "set".
d) Let's practice setting a number on the bottom number line. Let's pick an arbitrary number to set your Fill Master
to, like 236.
1. Press the left arrow key as many times as necessary to make the first or ones position flash. Then press the "up
arrow" key until the number 6 appears in the ones column.
2. Before the number in the ones column stops flashing push and release the "left arrow" key once. Now the tens
column is flashing and can be set. Press and release the "up arrow" key until a 3 shows in the tens column.
3. Again, before the number in the tens column stops flashing push and release the "left arrow" key once. Now
the hundreds column is flashing. Press and release the "up arrow" key until a 2 appears in the hundreds column.
Wait 4 seconds and the display will stop flashing and your number 236 is set.
4. Your fill number of 236 is now displayed on the lower display and is the Fill number entered in your Fill Master.
5. Press and release your foot pedal. Your Fill Master will run, count to 236 (top number) and stop. Push the foot
pedal again.
Note that the Fill Master counts to 236 and stops. Repeat this procedure a couple of times to get acquainted
with your unit.
6. Try entering three different new fill numbers such as 55, then 207, and finally 438 and try each one by press-
ing the foot pedal and letting the Fill Master count to the new number and stop. Note: When setting a new fill
number, the bottom number must be set to the number you desire-for example, digits not used must be set to
"0". To continue getting to know your Fill Master, proceed as follows:
a) Enter a small fill number such as 50, on the bottom line, then press and hold the foot pedal down. The filler
does not cycle again. The filler fills to your fill level and stops, when you release the foot pedal.
b) Now press the "Manual Fill" and while the unit is filling, turn the "Fill Speed" dial and note the rate of fill
change. Release "Manual Fill" button.
c) After your remove the foot pedal from the socket and turn the power switch "off", and the Time Interval
"off", change the "Mode Switch" to auto. Turn the power switch back "on". The bottom display indicates the
last fill number that was entered in the Fill Master as this unit has up to a 10-year memory. Turn the time
interval "on" full clock-wise and the Fill Master begins cycling. The interval between fills is adjusted with the
Time Interval dial. Try several positions on the dial to help familiarize yourself. To stop the cycle, turn the
power switch "off" or the mode switch to "pedal" while the unit is off. Repeat these procedures until you
are comfortable with your Fill Master's operation.
Dadant Fill Master
Learn Each Control's Function and Operation