Cole & Bright 63726 Краткое руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Наружное освещение Cole & Bright 63726. Cole & Bright 63726 8 страниц. Solar powered + linkable persis+ security light
Печатать страницуOPERATING INSTRUCTIONS
The switch located on the bottom of the solar light panel housing is to turn
on the product and also to link your Radar 360˚+ linkable lights together
(if you are creating a linked network)
CHARGING YOUR RADAR 360˚ LIGHTS
FOR THE FIRST TIME
1. Find a location where your light is exposed to full sunlight for at least 8
hours. This will typically require a full day so start charging in the morning.
2. Turn your light switch to the "M"
position for charging to commence.
3. After charging is complete or it is getting
dark, turn your switch to OFF until you are
ready to start the LINK process. This
prevents the battery from running down
again, if there is a delay between charging,
LINKING and installation.
LINKING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME
Only TWO (2) Lights (
1. Make sure your lights are fully charged before you commence
the Link procedure.
2. Take the 2 lights you wish to pair and place
the lights upwards on a level fl at surface.
3. Choose a light to be a Master light.
The other light(s) will then be
Secondary light.
4. On the Master light move the switch located in
between the two lights to "M" position (middle)
OFF
OFF
for linking 3 or more lights, please see website)
H
M
H
M
MASTER
SECONDARY
OFF
L-H
S
L-H
S
H
L-H
M
S
3