DADO Door Master Controller Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Контроллер DADO Door Master Controller. DADO Door Master Controller 20 страниц.

MASTER CONTROLLER PROGRAMMING LCD DISPLAY

The Dado Door Master Controller is programmed by entering the Main Menu and

scrolling to the various options. To enter the Main Menu, press the SETUP MODE button.

This button contains a red LED which should turn on when the button is pressed. The

menu will open up to the last setting that was displayed. The Main Menu is organized

in a list of user settings. The left and right arrows < > are used to scroll from the top of

the menu list to the bottom of the list. The menu list order may change, but this guide

will provide the basic programming information needed to set up the parameters.

Buttons Explained:

< >

Move up or down the Main Menu

- +

Add or subtract from a number, or select Yes/No fields

CURSOR Cycle the cursor through a menu item with more than one field

Enter/Exit the Main Menu. The LED is ON upon entering the menu.

To exit the menu, press the button again, the LED will turn off.

You may enter Setup Mode at any time after the system is booted

and has completed the diagnostics routine. If there is a problem

with the system not being able to complete the bootup routine,

it may be required to enter the Setup Mode using the BYPASS MODE.

Some other controls may not work while in MENU MODE.

SET CLOSE POS

10000

CURSOR