Basic Operations
Adjusting the print settings according to your needs allows you to produce better quality prints.
Caution
If you detect smoke, unusual smells or strange noises around the printer, immediately switch the printer
off and always unplug the printer. Contact your local Canon service representative.
To avoid injury, never put your hand or fingers inside the printer while it is printing.
Notes
If prints are unclear or specific colors are not reproduced even if there is plenty of ink, print head
nozzles may be clogged. Print the nozzle check pattern, check the results, then perform print head
cleaning. For details about maintenance, refer to "When Printing Becomes Faint or Colors are
Incorrect" in the User's Guide on-screen manual.
When printing in grayscale, depending on an image, the printing troubles may occur on the top and/or
bottom edges of the paper such as uneven coloration or white streaks. In this case, we recommend
printing with the top and bottom margins of the paper set to more than 45 mm / 1.77 inches using the
Easy-PhotoPrint Pro provided on the Setup CD-ROM or your page layout software.
When using a page layout software or the like, prepare paper whose longer side is at least 90 mm /
3.54 inches longer than the length of the image, then print it with the top and bottom margins set to
more than 45 mm / 1.77 inches. For details on how to use the Easy-PhotoPrint Pro, refer to the Photo
Application Guide on-screen manual.
You can use Easy-PhotoPrint or Easy-PhotoPrint Pro to easily do print operations when printing
photographs. Easy-PhotoPrint and Easy-PhotoPrint Pro are provided on the Setup CD-ROM. For
details on how to use Easy-PhotoPrint and Easy-PhotoPrint Pro, refer to the Photo Application Guide
on-screen manual.
Printing with Windows
Notes
Depending on your application program, operations may differ. For details, refer to the instruction
manual of your application.
The steps described in this section are for printing in Windows XP Service Pack 2.
1
Turn on the printer, then load the paper.
For details, refer to "Loading Paper in the Auto Sheet Feeder" or "Loading Paper in the Front
Tray" in the User's Guide on-screen manual.
2
From your application's File menu, select Print.
3
Ensure that your printer is selected, then click Preferences (or Properties).
4
Specify the required settings and click OK.
Ensure that Paper Source is set to the position in
which you loaded the paper in step 1.
Notes
For details about the printer driver, refer to the
Printer Driver Guide on-screen manual.
Click Instructions on the Main tab or
Maintenance tab, to view the Printer Driver Guide
on-screen manual. If the On-screen Manual is not
installed, Instructions is not displayed.
5
To start printing, click Print (or OK).
Printing will start in a few moments. Do not open the Top Cover while printing.
6
Basic Operations
Печатать страницу