Daedong TG15-A0003B Инструкции по установке - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по установке для Рабочий свет Daedong TG15-A0003B. Daedong TG15-A0003B 4 страницы. Work lamp kit

4. Pass the LED work lamp assembly wiring, which was assembled in Step 3, through the pillar cover hole (A) to connect

it to the wiring connector on the vehicle body.

5. Install the LED work lamp bracket and pillar cover to the cabin together with the bolt (7).

And insert the cap nuts (8)

※ Perform installation on the left side with the same method.

TG120_07_작업등키트_영문-A4.indd 4

TG2A704A

TG2A705A

6. To install rear work lamp, open the cabin roof, secure the roof with a rod, and

fix the rear work lamp () to the bracket (A) with the bolt (2), nut (4).

TG2A707C

7. Push the work lamp wiring through the hole A to pull it into the cabin. Then,

connect it to the body wiring connector (B).

TG2A708A

8. Install the cabin roof.

A : Rear work lamp

B : Side work lamp

TG2A709b

- 4 -

REMARKS

•

Be sure to remain enough length

of wire outside of the pillar before

tighten it so that lamp angle can be

adjusted freely.

TG2A710A

TG2A706b

2016-07-04 오전 8:34:32