Asus 90MB1580-M0EAYC Руководство - Страница 12
Просмотреть онлайн или скачать pdf Руководство для Материнская плата Asus 90MB1580-M0EAYC. Asus 90MB1580-M0EAYC 28 страниц.
Печатать страницу
13. COM Port header
This header is for a serial (COM) port. Connect the serial port module
cable to this header, then install the module to a slot opening at the back
of the system chassis.
14. DMIC connector
The DMIC connector is for connecting the digital microphone module used in All-in-One
chassis.
15. Front panel audio header
This header is for a chassis-mounted front panel audio I/O module that
supports HD audio standard. Connect one end of the front panel audio I/O
module cable to this header.
•
•
16. FPD Brightness header
This connector is for the LCD panel backlight and brightness controls. It enables the LCD
panel backlight, provides backlight control signals, and provides brightness control signals for
the brightness button on the front panel.
17. LPC Debug header
This header allows connection to a LPC Debug card.
•
•
•
18. LVDS connector
This connector is for an LCD monitor that supports Low-voltage Differential Signaling (LVDS)
interface.
19. M.2 slot (Key E)
This socket allows you to install an E key and type 2230 for WIFI/BT devices supporting PCIe
mode.
20. Panel Off header
This 2-pin header is for connecting a monitor switch that can turn off the LCD panel display
backlight.
1-4
We recommend that you connect a high-definition front panel
audio module to this header to avail of the motherboard's high-
definition audio capability.
If you want to connect a high-definition front panel audio module
to this header, set the Front Panel Type item in the BIOS Setup
to [HD Audio]. By default, this header is set to [HD Audio].
Scan the QR code to view the meaning of each debugging
code.
Debugging codes are only available for ASUS LPC Debug
cards.
Contact your region sales representative for LPC Debug
cards ordering.
COM
AAFP
HD-audio-compliant
pin definition
LPC_DEBUG
GND
CK_24M_LPC
+3V
+3V
Chapter 1: Product Introduction
PIN 1
S_LFRAME#
S_LAD3
S_LAD2
S_LAD1
S_LAD0
PIN 1