Doremi MB-4K Руководство пользователя - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя для Компьютерное оборудование Doremi MB-4K. Doremi MB-4K 15 страниц.

Печатать страницу

5 MB-4K Macros

The unit can be configured from a DCP-2000 via the sending of Macro during a ShowPlayList.
This configuration would be similar to the Manual Configuration described above for the
supported configurations.
The supported Macros are described in the following sections.

5.1.1 How to use Macros on DCP-2000

Please refer to the DCP-2000 documentation (Field Installer and Operator manuals) for more
information on how to make and use Macros on the DCP-2000.

5.1.2 SET_MB_ALL2K

This macro sets the "2K All Outputs" mode, as described in section 4.5.3.

5.1.3 SET_MB_4K

This macro resets the "2K All Outputs" mode and the "2K Output" mode to be in 4K output as
described in section 4.5.3 and 4.5.4.

5.1.4 SET_MB_2K

This macro sets the "2K Output" mode, as described in section 4.5.4.

5.1.5 SET_3D_444

This macro sets the 3D 4:4:4 12bits output mode, as described in section 4.5.5.

5.1.6 SET_3D_422

This macro sets the 3D 4:2:2 10bits output mode, as described in section 4.5.5.

5.1.7 SET_OFFSET

This macro sets an horizontal and a vertical offset used to move the position of the generated
subtitles.
This macro usage is :
SET_OFFSET <x> <y>
where <x> is the horizontal offset to apply, and <y> is the vertical offset to apply.
This can be used in a 3D setup to move the subtitle of each MB-4Ks left or right in order change
the depth at which the subtitles are seen by the viewer.
MB_4K_Manual_000234_v1_3.doc
Page 14
Version 1.3
M4K.OM.000234.DRM
Doremi Labs, Inc Confidential