DOREMIDI MTD-1024 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медиаконвертер DOREMIDI MTD-1024. DOREMIDI MTD-1024 8 страниц. Midi to dmx box
Печатать страницуDisplay
SN
Serial Number
DMX
DMX Channel
Sta
MIDI Status
Ctl
Controller/Note
Number
CH
MIDI Channel
En
Enable switch
Other operations
Name
Delete One Configuration
Clear All Configuration
Enter Firmware Upgrade
SN
1
2
3
Name
Display and configure the parameters of the current serial number.
Parameter range: 1~1024.
added after the existing serial number has been configured.)
Configure the DMX channel.
Parameter range: 1~1024.
DMX OUT1: 1~512
Configure the MIDI status byte.
Parameter range: Note/AT/CC.
Note: MIDI Notes.
CC: MIDI Continuous Controller.
AT: MIDI After Touch.
Configure MIDI controller/note numbers.
MIDI
Parameter range: 0~127.
When Sta = Note/AT, Ctl is the note number.
When Sta = CC, Ctl is the controller number.
Configure MIDI channels for MIDI messages.
Parameter range: All, 1~16, default All.
All: Respond to messages from all MIDI channels.
Configure to enable the parameters of this serial number.
1: enable.
Select a serial number, press and hold the knob for 2 seconds, and the
configuration content of the serial number will be cleared.
Select the last blank serial number, press and hold the knob for 2 seconds.
Enter the factory reset. Then select "Yes".
Press and hold the knob, then power on the product, the product will enter
the upgrade mode.
notification, if there is a firmware update.)
DMX
Sta
Ctl
CH
En
2
Note
0
All
0
(Note: A new serial number will only be
DMX OUT2: 513~1024.
0: disable enable.
Description
Factory Reset?
Yes
(Note: Please pay attention to the official website
Upgrade...
Description
No