DOREMIDI MTR-5 Инструкции - Страница 3
Просмотреть онлайн или скачать pdf Инструкции для Медиаконвертер DOREMIDI MTR-5. DOREMIDI MTR-5 5 страниц.
Печатать страницу3) Select the type of TRS interface: Users can select the desired TRS type through the
"SWITCH" of TRS-5 according to the TRS interface type of their own instruments. The
MTR-5 has five TRS types to choose from.
4) Connect the MIDI device to the TRS interface: Using a 6.35mm cable, connect the
MTR-5 to a MIDI device with a TRS input.
4. Description of TRS type
Please select the corresponding type through the SWITCH of the MTR-5 according to
the type of the TRS interface of your instrument. The MTR-5 provides five TRS interface
modes to meet the MIDI devices of various TRS interface types, as shown in the figure:
1)
TYPE-A: Type-A is a standard formulated by the MIDI Association. Tip outputs MIDI
messages, Ring is connected to +5V, and Sleeve is grounded. Most instruments will
use this interface type, such as Korg, Make Noise, BOSS, Jackson Audio, etc.
2)
TYPE-B: Tip is connected to +5V, Ring outputs MIDI messages, and Sleeve is
grounded. Some instrument manufacturers use this type, such as Arturia (BeatStep
Pro), Novation (Launchpad Pro), 1010music, etc.
3)
TIP ACTIVE: Tip outputs MIDI messages, Ring is not connected, Sleeve is grounded,
this type is used for some musical instruments that do not require power supply MIDI
ports, and MIDI messages are communicated through Tip, such as Alexander Pedals,
Meris, Empress Effects, Bondi Effects, etc. .
4)
RING ACTICE: Tip is not connected, Ring outputs MIDI messages, and Sleeve is
grounded. This type is used for some instruments that do not require a MIDI port for
power supply, and communicate MIDI messages through Ring, such as Chase Bliss
Audio, etc.
5)
TIP&RING ACTIVE: Both Tip and Ring output MIDI messages, and Sleeve is grounded.
This type can be connected to a Y-type TRS cable to split a stereo TRS jack into 2
outputs.