Cole Parmer EW-36223-05 Руководство по эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Контроллер Cole Parmer EW-36223-05. Cole Parmer EW-36223-05 20 страниц. Heating controller
Печатать страницу
9.3.
Replacing the Energy Regulator
9.3.1. Remove the energy regulator knob by pulling in a vertical direction away from the unit.
9.3.2.
9.3.2.
9.3.2. Remove and retain the regulator spindle locknut and shakeproof washer.
9.3.2.
9.3.2.
9.3.3.
Turn the controller up-side down and remove the two fixing screws retaining the base.
9.3.3.
Turn the controller up-side down and remove the two fixing screws retaining the base.
9.3.3. Turn the controller up-side down and remove the two fixing screws retaining the base.
Lift the base off.
Lift the base off.
9.3.3.
Turn the controller up-side down and remove the two fixing screws retaining the base.
9.3.3.
Turn the controller up-side down and remove the two fixing screws retaining the base.
Lift the base off.
Lift the base off.
Lift the base off.
9.3.4.
Disconnect the tagged wires one at a time from old and connect to the new energy
9.3.4. Disconnect the tagged wires one at a time from old and connect to the new energy
9.3.4.
Disconnect the tagged wires one at a time from old and connect to the new energy
regulator. Refer to wiring diagram.
regulator. Refer to wiring diagram.
9.3.4.
Disconnect the tagged wires one at a time from old and connect to the new energy
regulator. Refer to wiring diagram.
9.3.4.
Disconnect the tagged wires one at a time from old and connect to the new energy
regulator. Refer to wiring diagram.
regulator. Refer to wiring diagram.
Reassemble.
Reassemble.
9.3.5.
Position new energy regulator and then fit and tighten the shake proof washer and the
9.3.5.
Position new energy regulator and then fit and tighten the shake proof washer and the
Reassemble.
Reassemble.
locknut.
locknut.
9.3.5.
Position new energy regulator and then fit and tighten the shake proof washer and the
9.3.5.
Position new energy regulator and then fit and tighten the shake proof washer and the
locknut.
locknut.
Remove and retain the regulator spindle locknut and shakeproof washer.
Remove and retain the regulator spindle locknut and shakeproof washer.
Remove and retain the regulator spindle locknut and shakeproof washer.
Remove and retain the regulator spindle locknut and shakeproof washer.
14