Asus Blitz Formula Установка
Просмотреть онлайн или скачать pdf Установка для Материнская плата Asus Blitz Formula. Asus Blitz Formula 2 страницы. Fusion block system
Печатать страницуInstalling Fusion Block System accessory
Install your watercooling system to the motherboard using the bundled accessories
to obtain the best thermal solution.
Package contents
3/8" ID tubes x 2
/2" ID tube clips x 2
tube clips x 2
For watercooling system with 3/8" ID tubes
1.
Firmly press a tube clip and fit the tube into the clip.
2.
Press the clip and connect the tube to the waterblock. When done, release
the clip to tighten the two together.
3.
Repeat Step and 2 for another tube. Make sure that both tubes are well
connected to prevent leak, and then fill the coolant into the reservoir.
1
Installing Fusion Block System accessory
1/2" to 3/8" ID fittings x 2 10mm to 3/8" ID fittings x 2
3/8" ID tube clips x 6
2