Canon VIXIA HF M300 Процедура обновления микропрограммы

Просмотреть онлайн или скачать pdf Процедура обновления микропрограммы для Программное обеспечение Canon VIXIA HF M300. Canon VIXIA HF M300 10 страниц. Canon vixia hf-m300
Также для Canon VIXIA HF M300: Справочное руководство (2 страниц), Руководство (26 страниц), Краткое руководство по эксплуатации (7 страниц)

Canon Digital Video Camcorder Firmware Update Procedure

VIXIA HF M30

VIXIA HF M31

VIXIA HF M300

LEGRIA HF M31

LEGRIA HF M36

LEGRIA HF M300

LEGRIA HF M306

Firmware is software installed to control the equipment. Using the firmware, the camcorder can perform many

operations, such as shooting or processing the image. The following is an explanation of how to download the

data for the new firmware, save it to your computer's hard disk, copy it to an SD (or SDHC) memory card, and

update your camcorder to the new firmware.

Please note that, to perform this update you will need the following, in addition to a computer: a commercially

available SD memory card or SDHC memory card (32 MB or more), and a commercially available SD memory

card reader or an SD card slot built into the computer. Please have these items ready in advance.

Make sure you have read the precautions and procedures below carefully before updating the firmware.

IMPORTANT: Observe the following precautions when updating the firmware

When updating the firmware, make sure to use a battery pack and power the camcorder using the

supplied compact power adapter.

Before updating the firmware, initialize the SD (or SDHC) memory card in the camcorder. When you

initialize the SD (or SDHC) memory card, any data written on it will be erased, so please be sure to

save a copy of any important data on your computer or somewhere other than the card, prior to

initializing it.

While updating the firmware, make absolutely sure not to turn the camcorder off or to operate its

buttons or controls. Doing so could cause camcorder malfunctions.

After the firmware update is completed, all of the camcorder settings are reset to their default

values.

After the firmware update is completed, it is not possible to revert back to a previous version.

If the firmware update does not finish normally, or if the camcorder no longer starts normally, please

contact our camera repair center.